Libreria applicativa
Casi applicativi per 2012-
Inserisci un codice componente o una parola chiave per trovare scenari tipici, circuiti di riferimento, consigli di progettazione e soluzioni di sistema nella libreria Voltkit Club.
Casi applicativi
Libreria applicativa
DC1830B-A: 20 ~ 60Vin, 5A 4-Cell LiFePO4, Solar Charger
Demonstration circuit 1830B is a battery charger controller and PowerPath™ manager featuring the LTC®4000. This board should be connected to a front end DC/DC power supply for a complete ch...
DC1830B-C: 20 ~ 60Vin, 5A 4-Cell LiFePO4, Solar Charger with Maximum Power Point Control
Demonstration circuit 1830B - C is a battery charger controller and PowerPath manager with maximum power point control (MPPC) featuring the LTC4000-1. MPPC extracts near maximum power from...
DC1830B-D: 20 ~ 60Vin, 5A 4-Cell LiFePO4, Solar Charger with Maximum Power Point Control
The Demo Board DC1830B-D is a battery charger controller with maximum power point control (MPPC) featuring the LTC4000-1. MPPC extracts near maximum power from high impedance sources such a...
NCP5106BA36WGEVB: 36W CFL Driver, 120V or 230V
This document describes how the NCP5106B driver can be implemented in a ballast application. The scope of this application note is to highlight the NCP5106B driver and not to explain or det...
NCP5104BA36WGEVB: 36W CFL, 85 ~ 145V/184 ~ 265VAC in
This document describes how the NCP5104 driver can be implemented in a ballast application. The scope of this evaluation board user's manual is to highlight the NCP5104 driver and not to ex...
STEVAL-IHM040V1: 500mA, 3-Ph BLDC, 115/230VAC in or 150 ~ 350VDC in
The STEVAL-IHM040V1 is a 3-phase permanent magnet brushless motor driver designed to drive the motor using either the six-step or field-oriented control (FOC) commutation technique. The boa...
EVAL6482H: Stepper, 6A/Phase @ 10.5 ~ 85V in
The EVAL6482H demonstration board is a high power microstepping motor driver. In combination with the STEVAL-PCC009V2 communication board and the evaluation software, the board allows the u...
DC1601B-C: 12V @ 20A, 6 ~ 36V in, Buck/Boost
Demonstration circuit DC1601B is a PolyPhase® power supply featuring the LTM®4607 power module, a complete high efficiency switching mode buck-boost power supply.The DC1601B input voltage r...
DC512B: 12.6V @ 3A, Li-Ion Battery Charger, 15 ~ 25V in
Demonstration circuit DC512B is a single battery switching step-down charge controller featuring the LTC4100. The recommended input power is 15 to 20V at 3.5A. A two-position jumper allows...
DC2042A: Multi-Source Energy Harvesting
The DC2042A is a versatile energy harvesting demo board that is capable of accepting piezoelectric, solar, 4mA to 20mA loops, thermal-powered energy sources or any high impedance AC or DC s...
EPC9050 : 2.5A, 0 ~ 80V, Half Bridge
This development board is in a half bridge topology with onboard gate drives, featuring the EPC2035/36 eGaN® field effect transistors (FETs). The purpose of these development boards is to s...
TPA3118D2EVM: 30W x2 @ 8Ω, 4.5 ~ 26V, Class D
This User’s Guide describes the operation of the evaluation module for the TPA3118D2. The manual also provides measurement data and design information including the schematic, the Bill of M...