SMD Marking

X2

Possible components matching this marking.A marking is not a guaranteed identification by itself.

13possible components
VERY HIGHambiguity level
Filters13 candidates

Narrow the list using the package, manufacturer or component family printed on the board.

13 possible components

Results are ordered by the available marking evidence.

1–13 of 13
1 1T 4122 evidence sources Sony smd1 DIODE HIGH2 sources SMD, Variable Capacitance Diode, 30V | Si-DiManufacturer hint: Sony 2 RN 1130F2 evidence sources Toshiba smd2 TRANSISTOR HIGH2 sources SMD,Transistor Silicon NPN Epitaxial Type, 50V 100mA 100mW | Si-N+RManufacturer hint: Toshiba 3 RN 1130FT2 evidence sources Toshiba smd2 TRANSISTOR HIGH2 sources SMD,Transistor Silicon NPN Epitaxial Type, 50V 100mA 100mW | Si-N+RManufacturer hint: Toshiba 4 UMX 2N2 evidence sources ROHM Semiconductor smd1 TRANSISTOR HIGH2 sources SMD, 2x 2SC2412AK | Si-NManufacturer hint: ROHM Semiconductor 5 2SK 94-22 evidence sources - - FET HIGH2 sources SMD, J-FET, N-CHANNEL 6 IMX 22 evidence sources ROHM Semiconductor smd1 TRANSISTOR HIGH2 sources SMD, 2x 2SC2412AK | Si-NManufacturer hint: ROHM Semiconductor 7 EMX 22 evidence sources ROHM Semiconductor smd1 TRANSISTOR HIGH2 sources SMD, 2x 2SC2412AK | Si-NManufacturer hint: ROHM Semiconductor 8 GZF 56C2 evidence sources Vishay smd1 DIODE HIGH2 sources SMD, low leakage current, 0.8W | Z-DiManufacturer hint: Vishay 9 BZX 84 / C 302 evidence sources Siemens smd2 DIODE HIGH2 sources Stabi, SMD | Si-DiManufacturer hint: Siemens 10 BZX 88 /C 302 evidence sources Unknown manufacturer (FER) smd2 DIODE HIGH2 sources Z, 5%, SMD | Si-DiManufacturer hint: Unknown manufacturer (FER) 11 BZV 49 /C 302 evidence sources Siemens smd1 DIODE HIGH2 sources Stabi, 5%, SMD | Si-DiManufacturer hint: Siemens 12 BZT52 C562 evidence sources Vishay smd1 DIODE HIGH2 sources SMD,Silicon Planar Power Zener Diode | Z-DiManufacturer hint: Vishay 13 BZT52 B562 evidence sources Vishay smd1 DIODE HIGH2 sources SMD,Silicon Planar Power Zener Diode | Z-DiManufacturer hint: Vishay

Safe identification

How to verify this result

1. Match the physical package

Compare the candidate package with the outline, pin count and polarity mark on the actual board.

2. Confirm the electrical fit

Check the official datasheet for pinout, voltage, current and thermal ratings—not only the marking.

3. Treat uncertainty as a stop signal

Do not treat a short marking, a low-confidence candidate or a family match as a drop-in replacement.