Voltkit
AI RFQ RFQ

SMD Marking

E6

Possible components matching this marking.A marking is not a guaranteed identification by itself.

8possible components
HIGHambiguity level
Filters8 candidates

Narrow the list using the package, manufacturer or component family printed on the board.

8 possible components

Results are ordered by the available marking evidence.

1–8 of 8
1 ZC 2800E2 evidence sources Unknown manufacturer (FER) / Zetex smd2 DIODE HIGH2 sources Schottky, HF | Si-DiManufacturer hint: Unknown manufacturer (FER) / Zetex 2 PDTB 113ZK2 evidence sources Philips Semiconductors smd2 TRANSISTOR HIGH2 sources SMD, resistor-equipped transistors, 50V 500mA, 250mW | Si-PManufacturer hint: Philips Semiconductors 3 BAP 55L2 evidence sources Philips Semiconductors smd1 DIODE HIGH2 sources SMD, PIN diode, 50V | PIN-DiManufacturer hint: Philips Semiconductors 4 PESD 5V0S1BA2 evidence sources Philips Semiconductors dil1 DIODE HIGH2 sources SMD, Bi-directional ESD protection, 5V | Z-Di bidir.Manufacturer hint: Philips Semiconductors 5 BFG 17A2 evidence sources Philips Semiconductors / Valvo smd1 TRANSISTOR HIGH2 sources SMD, 3GHz wideband transistor, 15V 50mA, 300mW | Si-NManufacturer hint: Philips Semiconductors / Valvo 6 HSB 226WK2 evidence sources Renesas Electronics smd2 DIODE HIGH2 sources SMD, Dual Silicon Schottky Barrier Diode, 25V, 50mA | Si-DiManufacturer hint: Renesas Electronics 7 BZX 585-B102 evidence sources Philips Semiconductors smd1 DIODE HIGH2 sources SMD, Voltage regulator diode, 2% Tolerance, 10V | Z-DiManufacturer hint: Philips Semiconductors 8 BZD27 C16P2 evidence sources Vishay / Taiwan Semiconductor smd1 DIODE HIGH2 sources SMD, Voltage regulator | Z-Di, ICManufacturer hint: Vishay / Taiwan Semiconductor

Safe identification

How to verify this result

1. Match the physical package

Compare the candidate package with the outline, pin count and polarity mark on the actual board.

2. Confirm the electrical fit

Check the official datasheet for pinout, voltage, current and thermal ratings—not only the marking.

3. Treat uncertainty as a stop signal

Do not treat a short marking, a low-confidence candidate or a family match as a drop-in replacement.