Библиотека применений
Примеры применения: DG 2
Введите номер компонента или ключевое слово, чтобы найти типовые сценарии, схемы включения, рекомендации и системные решения из библиотеки Voltkit Club.
Примеры применения
Библиотека применений
MAXREFDES89#: ARDUINO Shield 4 DC Brush Motor Driver
Brushed DC motors provide cost-effective, convenient motion in many applications ranging from electric toothbrushes to vending machines. The simplicity and reliability of brushed DC motors...
CY3218-CAPEXP1: 4 Button Cap Sense
The CY3218-CAPEXP1 CapSense® Express™ Evaluation Kit is used to evaluate the CapSense Express device. This kit demonstrates the following features: CapSense buttons, LED drive, digital inpu...
DRV8825EVM: Stepper w/Indexer Feature - 2.5A/Phase @ 8 ~ 45V
The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar ste...
DRV8812EVM: 1 Stepper or 2 Brushed DC, 1.5A/Phase @ 8 ~ 45V
The DRV8812 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar ste...
DRV8823EVM: Dual 1.5A DC Motor Driver, 8 ~ 27 V
The DRV8823 provides an integrated motor driver solution for printers and other office automation equipment applications. The motor driver circuit includes four H-bridge drivers. Each of th...
DRV8840EVM: DC Motor Driver with Brake
The DRV8840 evaluation module consists of a 5.0A, single-H-bridge motor driver with a Phase/Enable control interface and a small number external components that can be used to drive a singl...
DRV8843EVM: 1 Stepper or 2 Brushed DC, 2.5A/Phase @ 8 ~ 45V
The DRV8843 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can be used to drive tw...
DM330022: Stepper Bi-Polar or Unipolar, 3A @ 0 ~ 80 V
The Microchip dsPICDEM™ MCSM Development Board is targeted to control both unipolar and bipolar stepper motors in open-loop or closed-loop (current control) mode. The hardware is designed i...
EVAL6226QR: 1 Stepper or 2 Brushed DC, 1A/Phase @ 8 ~ 52V
This application note describes the demonstration board of the DMOS dual full-bridge L6226Q designed for motor control applications. The board implements a typical application that can be u...
DRV8821EVM: Stepper, 1.5A/Phase @ 8 ~ 27V
The DRV8821 provides a dual microstepping-capable stepper motor controller/driver solution for printers, scanners, and other office automation equipment applications. Two independent steppe...