Библиотека применений
Примеры применения: USB
Введите номер компонента или ключевое слово, чтобы найти типовые сценарии, схемы включения, рекомендации и системные решения из библиотеки Voltkit Club.
Примеры применения
Библиотека применений
EVAL-SCS002V1: Standalone USB Type-C Port Controller for Power Sinking Devices
The EVAL-SCS002V1 shows minimum USB-C sink implementation. It can be uses as a small footprint reference design for fast migration of any USB mini-B, micro-B or STD-B application to USB-C....
EVAL-SCS001V1: Standalone USB PD Controller for Power Sinking Devices
The EVAL-SCS001V1 reference design let you create a USB Type-C connector quickly and easily in order to power any application up to 100 W (20 V, 5 A). The Type-C port is managed by the STUS...
LC234X: USB to UART Bridge
The LC234X module is a low cost USB to UART bridge using the FTDI FT234XD to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinout follows the indu...
EVK-UTC2000: USB Type-C Controller
EVK-UTC2000 Evaluation Kit is intended to demonstrate the form factor and reversibility of the USB Type-C™ cable operation as enabled by the UTC2000 basic Type-C controller. The kit include...
TS5USBC402EVM: Dual 2:1 USB 2.0 Mux/DeMux with 20V OVP Evaluation Module
The TS5USBC402 is a bidirectional low-power dual port, high-speed, USB 2.0 analog switch with integrated protection for Type-C systems. The device is configured as a dual 2:1 or 1:2 switch...
LC231X: USB 2.0 to UART Bridge
The LC231X module is a low cost USB to UART bridge using FTDI’s FT231X to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc.. It also provides the pinout wh...
TUSB546EVM: USB Type-C Alternate Mode Redriver Switch
The TUSB546 USB Type-C™ Alternate Mode Redriver Switch Evaluation Module (TUSB546EVM) provides a USB Type-C Alternate Mode redriver switch that enables 5Gbps USB data and 8.1Gbps DisplayPor...
TUSB564RNQEVM: USB Type-C / VESA DisplayPort™, Alternate Mode, redriving switch
The TUSB564RNQEVM device is a USB Type-C / VESA DisplayPort™, Alternate Mode, re-driving switch which supports data rates up to 10 Gbps for an upstream facing port (device). This guide desc...
FUSB302TGEVB: Type-C Interface Detection Solution
The FUSB302 evaluation board (FUSB302TGEVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB302T provides. The evaluat...
STEVAL-USBC2DP: USB Type-C to DisplayPort Adapter
The compact USB Type-C to DisplayPort adapter reference design, with USB Type-C connector and DisplayPort connector, exploits Alternate Mode of the USB Type-C and Power Delivery specificati...
FUSB303GEVB: Autonomous USB Type-C Port Controller w/ I2C and GPIO Control
The FUSB303 evaluation board (FUSB303GEVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB303 provides. The evaluatio...
FUSB302BGEVB: Type-C Interface Detection Solution
The FUSB302 evaluation board (FUSB302BGEVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB302 provides. The evaluati...