SMD Marking

R5

Possible components matching this marking.A marking is not a guaranteed identification by itself.

9possible components
HIGHambiguity level
Filters9 candidates

Narrow the list using the package, manufacturer or component family printed on the board.

9 possible components

Results are ordered by the available marking evidence.

1–9 of 9
1 SRC 1205E2 evidence sources Unknown manufacturer (AUK) smd2 TRANSISTOR HIGH2 sources SMD, NPN Transistor, 50V 100mA, 150mW | Si-N+RManufacturer hint: Unknown manufacturer (AUK) 2 SRC 1205EF2 evidence sources Unknown manufacturer (AUK) smd2 TRANSISTOR HIGH2 sources SMD, NPN Transistor, 50V 100mA, 150mW | Si-N+RManufacturer hint: Unknown manufacturer (AUK) 3 SRC 1205U2 evidence sources Unknown manufacturer (AUK) smd2 TRANSISTOR HIGH2 sources SMD, NPN Transistor, 50V 100mA, 200mW | Si-N+RManufacturer hint: Unknown manufacturer (AUK) 4 PBLS 4005 D2 evidence sources Philips Semiconductors smd1 TRANSISTOR HIGH2 sources SMD, Complement. Pair Amp., 40V 0.7A 0.25W | Si-N/P+RManufacturer hint: Philips Semiconductors 5 SRC 1205UF2 evidence sources Unknown manufacturer (AUK) smd2 TRANSISTOR HIGH2 sources SMD, NPN Transistor, 50V 100mA, 200mW | Si-N+RManufacturer hint: Unknown manufacturer (AUK) 6 BFR 93AR2 evidence sources Philips Semiconductors / Thomson Semiconducteurs / Siemens / Valvo / AEG-Telefunken / Motorola smd2 TRANSISTOR HIGH2 sources SMD, 6 GHz wideband transistor, 12V 35mA, 300mW | Si-NManufacturer hint: Philips Semiconductors / Thomson Semiconducteurs / Siemens / Valvo / AEG-Telefunken / Motorola 7 2SK 283-R52 evidence sources - - FET HIGH2 sources SMD, J-FET, N-CHANNEL 8 FS 1J2 evidence sources Fagor Electronica / Lite-On / Unknown manufacturer (JGD) smd1 DIODE HIGH2 sources SMD, Passivated Rectifier, 600V, 1A | Si-DiManufacturer hint: Fagor Electronica / Lite-On / Unknown manufacturer (JGD) 9 2SC 4092 -R5/RE2 evidence sources NEC (Nippon Electric Company) smd1 TRANSISTOR HIGH2 sources SMD, UHF | Si-NManufacturer hint: NEC (Nippon Electric Company)

Safe identification

How to verify this result

1. Match the physical package

Compare the candidate package with the outline, pin count and polarity mark on the actual board.

2. Confirm the electrical fit

Check the official datasheet for pinout, voltage, current and thermal ratings—not only the marking.

3. Treat uncertainty as a stop signal

Do not treat a short marking, a low-confidence candidate or a family match as a drop-in replacement.