Application Case Lookup
Application cases for LED
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
EVAL6470H: 3A Bi-Polar Motor Driver, 8 ~ 45V in
The EVAL6470H demonstration board is a fully integrated microstepping motor driver. In combination with the STEVAL-PCC009V2 communication board and the dSPIN evaluation software, the board...
STEVAL-CCA027V1: Class D, 50W + 50W BTL, 8 ~ 26 Vin
The STEVAL-CCA027V1 demonstration board is designed for the TDA7492 high power dual BTL class-D audio amplifier. Due to the high efficiency, the TDA7492 device is assembled in PSSO36 and is...
TUSB9261DEMO: USB 3.0 to SATA
The TUSB9261DEMO board is a free-standing reference design that acts as a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial-ATA (SATA) device. The TUSB9261DEMO is used to evaluate...
TPS62080EVM-641: 2.5V @ 1.2A, 2.3 ~ 6V in
The TPS6208x synchronous switched mode converters are based on DCS™ Control (Direct Control with Seamless transition into Power Save Mode). This is an advanced regulation topology that comb...
STEVAL-ISA044V6: 3.3V @ 3A, 2.5 ~ 18V, DFN
The STEVAL-ISA044V6 demonstration board is based on the ST1S10 device assembled in a DFN package. The ST1S10 is a step-down DC-DC converter with the inhibit function optimized for powering...
STEVAL-ISA044V5: 3.3V @ 3A, 2.5 ~ 18V, SO-8
The STEVAL-ISA044V5 is a demonstration board based on the ST1S10 device assembled in a Power SO-8 ePad package. The ST1S10 is a step-down DC-DC converter with the inhibit function optimized...
STEVAL-ISA076V1: Li-Ion/Li-Pol, 1-Cell, 4 ~ 12V in
The L6924D is a fully monolithic battery charger dedicated to single-cell Li-Ion/Polymer battery packs. It is the ideal solution for space-limited applications, like PDAs, handheld equipmen...
MCP1630RD-NMC1: 3 NiMH Cells, 6 ~ 14V in
The MCP1630 Low-Cost NiMH Battery Charger Reference Design demonstrates Microchip’s high-speed Pulse Width Modulator (PWM) (the MCP1630) used in a battery charger application. The MCP1630 i...
EVALHVLED805: 350mA @ 12V Max, 185 ~ 265V in
The EVALHVLED805 is a demonstration board equipped with the new HVLED805 PWM current mode LED driver and is designed for European mains. It can control, with very good accuracy, from 1 to 3...
MCP1640EV-SBC(1): Boost 2V or 3.3, 0.35 ~ 5.5Vin
* Output current is dependent on input voltage. The MCP1640 is a compact, high-efficiency, fixed frequency, synchronous step-up dc-dc converter. It provides an easy-to-use power supply solu...
LM2703EV: 20V @ 27mA, 2.2 ~ 7 Vin
The LM2703 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control scheme conserves operating current resulting in high efficiency over a w...
MCP1640EV-SBC(2): Boost 3.3V or 5V, 0.35 ~ 5.5Vin
* Output current is dependent on input voltage. The MCP1640 is a compact, high-efficiency, fixed frequency, synchronous step-up dc-dc converter. It provides an easy-to-use power supply solu...