Application Case Lookup
Application cases for AD 2 ...
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
LM3429BKBSTEVAL: 1A @ 28V Max, 10 ~ 70V in
This wide range evaluation board showcases the LM3429 NFET controller used with a buck-boost current regulator. It is designed to drive 4 to 8 LEDs at a maximum average LED current of 1A fr...
CSD163CEVM-591: 1.2V @ 25A, 8 ~ 14V in
CSD163CEVM-591 is designed to use a regulated 12V (8V – 14V) bus voltage to provide a regulated 1.2-V output at up to 25A of load current. CSD163CEVM-591 is designed to demonstrate the TPS4...
LM5030EVAL: 3.3V @ 10A, 36 ~ 72V in
The LM5030EVAL evaluation board provides the design engineer with a fully functional push-pull power converter using the LM5030 PWM controller. The performance of the board is: Input range:...
LMZ10504EVAL: 2.5V @ 4A, 2.95 ~ 5.5V in
The LMZ1050x SIMPLE SWITCHER® power module is a complete, easy-to-use DC-DC solution capable of driving up to 3A, 4A, or 5A load with exceptional power conversion efficiency, output voltage...
LMZ12003EVAL: 1.8V @ 3A, 4.5 ~ 20V in
The LMZ1420x and LMZ1200x SIMPLE SWITCHER power modules are easy-to-use DC-DC solution capable of driving up to a 3A load with exceptional power conversion efficiency, output voltage accura...
LMZ14203EVAL: 3.3V @ 3A, 6 ~ 42V in
The LMZ1420x and LMZ1200x SIMPLE SWITCHER power modules are easy-to-use DC-DC solution capable of driving up to a 3A load with exceptional power conversion efficiency, output voltage accura...
LM20125EVAL: 1.2V @ 5A, 2.95 ~ 5.5V in
The LM20125 is a full featured buck switching regulator capable of driving up to 5A of load current. The nominal 500 kHz switching frequency of the LM20125 reduces the size of the power sta...
RD-171 LM5001: +/- 5V @ 250mA, 10 ~ 30V in
A very low noise differential power supply for split rail systems requiring low noise +5V and -5V (higher or lower voltage is possible). This design is fully isolated and capable of floatin...
LMZ10504EXTEVAL: 2.5V @ 4A, 2.95 ~ 5.5V in
The LMZ10504EXT SIMPLE SWITCHER® power module operates from -55°C ~ 125°C and is a complete, easy-to-use DC-DC solution capable of driving up to 4A load. It has exceptional power conversion...
RD-173 LM3429: 700mA @ 16V Max, 9 ~ 36V in
The demonstration board includes a LM3429 device that converts 9VDC to 36VDC input to a 700mA constant current output designed to operate a load of three to four series LEDs. This reference...
RD-134: 1A single LED Driver, 9V Battery
This demonstration circuit is designed to drive a single Seoul Semiconductor Z-Power P4 LED at a forward current of 1A ± 10% with a peak-to-peak ripple current of 200 mA or less. The expect...
TOS-100 V1.1: Stepper Arduino Shield 1.7A/Phase @ 9 ~ 40V
The TOS-100 is an Arduino compatible Shield capable of driving one stepper motor up to to 1.7A that utilizes the Trinamic Motion Control TMC260 motor driver chip. For added compatibility wi...