Application Case Lookup
Application cases for SC 14
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
EVAL-SCS002V1: Standalone USB Type-C Port Controller for Power Sinking Devices
The EVAL-SCS002V1 shows minimum USB-C sink implementation. It can be uses as a small footprint reference design for fast migration of any USB mini-B, micro-B or STD-B application to USB-C....
EVB_RT1710SGQW: Type-C Cable Identifier for Passive and Active Cables
The RT1710S is a Type-C cable ID for active and passive cables. All USB Full-Featured Type-C cables shall be electronically marked. Electronically marked cables shall support USB Power Deli...
MAXREFDES145#: 8-Channel IO-Link Master
The MAXREFDES145# 8-Channel IO-Link® Master Quick Start Guide describes the steps required to quickly get the MAXREFDES145# reference design up and running by controlling it with TEConcept'...
DC1789A: Isolated USB 2.0 Transceiver
Demonstration circuit 1789A is an isolated USB transceiver with isolated power featuring the LTM®2884. The demo circuit features an EMI optimized circuit configuration and printed circuit b...
EVAL-CN0336-PMDZ: 300 kSPS PMOD Data Acquisition System
The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ide...
EVAL-CN0355-PMDZ: Temperature Compensated Bridge Signal Conditioner and Driver
The circuit on EVAL-CN0355-PMDZ is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation channel. This circuit is ideal for a variety of...
MAXREFDES37#: IO-Link, Quad Servo Motor Driver
The MAXREFDES37# IO-Link® servo driver provides 5V power, four PWM outputs and four digital inputs for control of up to four 5V servo motors. IO-Link offers the ability to replace pneumatic...
MAXREFDES46#: 4-Chan Analog Input/Output PLC
The MAXREFDES46# is a compact, analog, remote terminal unit (RTU) programmable logic controller (PLC). This design features four accurate, isolated analog inputs and four accurate, isolated...
MAXREFDES79#: IO-Link 4-Port Master
IO-Link is the first open, field bus agnostic, low-cost, point-to-point serial communication protocol, used for communicating with sensors and actuators, that has been adopted as an interna...
CYUSB3KIT-003: USB 3.0 Host/Controller
Cypress EZ-USB® FX3™ (FX3) is an ARM-based controller designed to implement USB 3.0 peripherals. USB 3.0 offers the SuperSpeed signaling rate of 5 gigabits per second, which is 10 times gre...
OM13313: ASK Power Line Modem, 600 Baud (Typ)
The NXP TDA5051A is a complete Amplitude Shift Keying (ASK) modem for transmitting and receiving digital signals on standard power line or any two-wire AC or DC network. It is a cost-effect...
TIPD126: Bridge Sensor Conditioner
This bridge sensor conditioner module delivers a well regulated current output to a ground-referenced load. The first stage uses a mixed-signal programmable gain amplifier (PGA) to provide...