Application Case Lookup
Application cases for SC 10
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
EVAL-SCS001V1: Standalone USB PD Controller for Power Sinking Devices
The EVAL-SCS001V1 reference design let you create a USB Type-C connector quickly and easily in order to power any application up to 100 W (20 V, 5 A). The Type-C port is managed by the STUS...
EVAL-ADM3050EEBZ: Isolated CAN FD Transceiver
The EVAL-ADM3050EEBZ allows the user to evaluate the ADM3050E isolated signal and power transceiver for controller area network (CAN) or CAN with flexible data rate (CAN FD) networks. The E...
TUSB564RNQEVM: USB Type-C / VESA DisplayPort™, Alternate Mode, redriving switch
The TUSB564RNQEVM device is a USB Type-C / VESA DisplayPort™, Alternate Mode, re-driving switch which supports data rates up to 10 Gbps for an upstream facing port (device). This guide desc...
EVB_RT1710SGQW: Type-C Cable Identifier for Passive and Active Cables
The RT1710S is a Type-C cable ID for active and passive cables. All USB Full-Featured Type-C cables shall be electronically marked. Electronically marked cables shall support USB Power Deli...
DC1789A: Isolated USB 2.0 Transceiver
Demonstration circuit 1789A is an isolated USB transceiver with isolated power featuring the LTM®2884. The demo circuit features an EMI optimized circuit configuration and printed circuit b...
EVAL-CN0336-PMDZ: 300 kSPS PMOD Data Acquisition System
The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ide...
EVAL-CN0355-PMDZ: Temperature Compensated Bridge Signal Conditioner and Driver
The circuit on EVAL-CN0355-PMDZ is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation channel. This circuit is ideal for a variety of...
CYUSB3KIT-003: USB 3.0 Host/Controller
Cypress EZ-USB® FX3™ (FX3) is an ARM-based controller designed to implement USB 3.0 peripherals. USB 3.0 offers the SuperSpeed signaling rate of 5 gigabits per second, which is 10 times gre...
OM13313: ASK Power Line Modem, 600 Baud (Typ)
The NXP TDA5051A is a complete Amplitude Shift Keying (ASK) modem for transmitting and receiving digital signals on standard power line or any two-wire AC or DC network. It is a cost-effect...
TIPD126: Bridge Sensor Conditioner
This bridge sensor conditioner module delivers a well regulated current output to a ground-referenced load. The first stage uses a mixed-signal programmable gain amplifier (PGA) to provide...
TIPD108: PWM Signal Generator
This circuit utilizes a triangle wave generator and comparator to generate a pulse-width-modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An o...
ENC28J60-H: Ethernet Control Interface
ENC28J60-H is world’s smallest Ethernet controller development board with its size of only 30×24 mm. It provides easy connection to any microcontroller with only a few parts via SPI wh...