Application Case Lookup
Application cases for MP 26
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
MAXREFDES46#: 4-Chan Analog Input/Output PLC
The MAXREFDES46# is a compact, analog, remote terminal unit (RTU) programmable logic controller (PLC). This design features four accurate, isolated analog inputs and four accurate, isolated...
TPS65982-EVM (TIDA-00714): USB Type-C + USB PD Controller Power Switch + High Speed Multiplexer
The TPS65982 device is a stand-alone USB Type-C® and Power Delivery (PD) controller providing cable-plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS...
CY4609: 4-Port USB 3.0 Hub
The CY4609 RDK is based on the CYUSB3304-68LTXC hub controller. It is a small form-factor hardware supporting four USB 3.0 downstream ports that conform to USB 3.0 and BC v1.2 specification...
MAXREFDES24#: 4 Chan. Signal Conditioner
The Alameda (MAXREFDES24#) subsystem reference design features four dense, highly accurate analog outputs in a compact, galvanically isolated form factor. Each channel provides current or v...
HD3SS6126: USB 3.0 KVM Switch
This user's guide shows a USB 3.0 KVM switch application example of the HD3SS6126 device and provides recommendations for high-speed digital signal PCB design. Use the HD3SS6126 evaluation...
TIPD126: Bridge Sensor Conditioner
This bridge sensor conditioner module delivers a well regulated current output to a ground-referenced load. The first stage uses a mixed-signal programmable gain amplifier (PGA) to provide...
MAX3420EEVKIT-2+: 12 Mbps USB to SPI Interface
The MAX3420E evaluation kit-2 (EV kit-2) provides a proven design to evaluate the MAX3420E USB peripheral controller with SPI™ interface. The EV kit-2 board is jumper-connected to an Atmel®...
MAXREFDES18#: Isolated Analog Interface
In PLC and DCS systems, analog output currents and voltages provide critical control and actuation functions. The Carmel (MAXREFDES18#) reference design shown in Figure 1 provides a flexibl...
EVAL-ADM2682EEBZ: Isolated RS-422/RS-485 and Power
The ADM2682E/ADM2687E evaluation board can be used for easy evaluation of the ADM2682E and ADM2687E power and signal isolated RS-485 transceivers. Screw terminal blocks provide convenient c...
EVAL-ADM2687EEBZ: Isolated RS-422/RS-485 and Power
The ADM2682E/ADM2687E evaluation board can be used for easy evaluation of the ADM2682E and ADM2687E power and signal isolated RS-485 transceivers. Screw terminal blocks provide convenient c...
TUSB1064RNQEVM: USB Type-C to VESA DisplayPort™, Converter and Redriving Switch
The TUSB1064RNQEVM evaluation board is a USB Type-C to VESA DisplayPort™, Alternate Mode, redriving switch which supports data rates up to 10 Gbps for an Upstream facing port (device). This...
TUSB1002AEVM: USB 3.1, 10 Gbps, Dual Channel Linear Redriver
The TUSB1002A is a dual channel, USB 3.1 SuperSpeed Plus re-driver and signal conditioner supporting data rates of 10.0Gbps. The device complies with USB 3.1 spec revision 1.0, supporting e...