Application Case Lookup
Application cases for AS 03
Search by part number or keyword to explore typical uses, reference circuits, design notes, and system-level examples collected from Voltkit Club.
Use cases
Use Case Library
LC234X: USB to UART Bridge
The LC234X module is a low cost USB to UART bridge using the FTDI FT234XD to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinout follows the indu...
TS5USBC402EVM: Dual 2:1 USB 2.0 Mux/DeMux with 20V OVP Evaluation Module
The TS5USBC402 is a bidirectional low-power dual port, high-speed, USB 2.0 analog switch with integrated protection for Type-C systems. The device is configured as a dual 2:1 or 1:2 switch...
LC231X: USB 2.0 to UART Bridge
The LC231X module is a low cost USB to UART bridge using FTDI’s FT231X to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc.. It also provides the pinout wh...
FUSB303GEVB: Autonomous USB Type-C Port Controller w/ I2C and GPIO Control
The FUSB303 evaluation board (FUSB303GEVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB303 provides. The evaluatio...
STEVAL-USBC2DP: USB Type-C to DisplayPort Adapter
The compact USB Type-C to DisplayPort adapter reference design, with USB Type-C connector and DisplayPort connector, exploits Alternate Mode of the USB Type-C and Power Delivery specificati...
TUSB1044RNQEVM - USB Type-C Alternate Mode Re-Driver up to 10G Evaluation Module
The TUSB1044 is a USB Type-C Alt Mode redriver switch supporting data rates up to 10Gbps. This protocol-agnostic linear redriver is capable of supporting USB Type-C Alt Mode interfaces incl...
EVAL-CN0179-PMDZ: 4-20 mA Low Power, 14-Bit, Process Control Current Loop Transmitter
The circuit on EVAL-CN0179-PMDZ is a 4 mA-to-20 mA current loop transmitter for communication between a process control system and its actuator. The circuit output is 0 mA to 20 mA of curre...
EVAL-CN0355-PMDZ: Temperature Compensated Bridge Signal Conditioner and Driver
The circuit on EVAL-CN0355-PMDZ is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation channel. This circuit is ideal for a variety of...
EVAL-CN0336-PMDZ: 300 kSPS PMOD Data Acquisition System
The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ide...
MAXREFDES67#: uPLC, 24-Bit Single Ch Analog Input
The MAXREFDES67# reference design is a complete universal analog input for industrial applications. This unique 24-bit front-end accepts bipolar voltage and current, resistance temperature...
3220DFP-DGLEVM: USB-A to USB-C MUX w/ DFP Controller
The HD3SS3220 DFP Dongle EVM is designed to evaluate HD3SS3220 devices for DFP implementations. This EVM can also be used as a hardware reference design for any implementation using the HD3...
MAXREFDES79#: IO-Link 4-Port Master
IO-Link is the first open, field bus agnostic, low-cost, point-to-point serial communication protocol, used for communicating with sensors and actuators, that has been adopted as an interna...