Anwendungsbibliothek
Anwendungsbeispiele für ST 60
Geben Sie eine Teilenummer oder ein Stichwort ein, um typische Anwendungen, Referenzschaltungen, Entwicklungshinweise und Systemlösungen aus der Voltkit-Club-Bibliothek zu finden.
Anwendungen
Anwendungsbibliothek
EVAL-CN0336-PMDZ: 300 kSPS PMOD Data Acquisition System
The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ide...
MAXREFDES37#: IO-Link, Quad Servo Motor Driver
The MAXREFDES37# IO-Link® servo driver provides 5V power, four PWM outputs and four digital inputs for control of up to four 5V servo motors. IO-Link offers the ability to replace pneumatic...
TPS65982-EVM (TIDA-00714): USB Type-C + USB PD Controller Power Switch + High Speed Multiplexer
The TPS65982 device is a stand-alone USB Type-C® and Power Delivery (PD) controller providing cable-plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS...
CY4609: 4-Port USB 3.0 Hub
The CY4609 RDK is based on the CYUSB3304-68LTXC hub controller. It is a small form-factor hardware supporting four USB 3.0 downstream ports that conform to USB 3.0 and BC v1.2 specification...
CY4603: 4-Port USB 3.0 Hub
CY4603 is the development kit (DVK) for CYUSB3314-88LTXC, an advanced 88-QFN, 4-port USB 3.0 hub controller from Cypress. The hub controller supports Low-Speed (LS), Full-Speed (FS), Hi-Spe...
OM13313: ASK Power Line Modem, 600 Baud (Typ)
The NXP TDA5051A is a complete Amplitude Shift Keying (ASK) modem for transmitting and receiving digital signals on standard power line or any two-wire AC or DC network. It is a cost-effect...
TIPD125: DAC Signal Conditioning, 24-Bit SPI in
This unipolar to bipolar signal conditioning circuit uses an op amp with negative feedback and three resistors in a modified summing amplifier configuration to generate high-voltage bipolar...
CY4607: 4 Port USB 2.0 Hub, USB 2.0 FS/HS
This kit provides a reference board and documentation to evaluate, design, and manufacture low-power USB 2.0 hubs using the HX2VL hub controller family. The USB 2.0 Specification requires b...
ENC28J60-H: Ethernet Control Interface
ENC28J60-H is world’s smallest Ethernet controller development board with its size of only 30×24 mm. It provides easy connection to any microcontroller with only a few parts via SPI wh...
OM13314,598: Power Line Lighting Control
The TDA5051A lighting control demo consists of a master controller and a slave lighting controller. The master controller uses the High-Bay board, which consists of the LPC1114 microcontrol...
EVAL-CN0158-EB1Z: Isolated USB Hub
The ADuM4160 is designed primarily as an isolation element for a peripheral USB device. However, there are occasions when it is useful to isolate a host device. Several issues must be addre...
EVAL-CN0159-EB1Z: Isolated USB Cable
The goal of this application circuit is to isolate a peripheral device that already implements a USB interface. It is not possible to make a fully compliant bus-powered cable because there...