Anwendungsbibliothek
Anwendungsbeispiele für MB 14
Geben Sie eine Teilenummer oder ein Stichwort ein, um typische Anwendungen, Referenzschaltungen, Entwicklungshinweise und Systemlösungen aus der Voltkit-Club-Bibliothek zu finden.
Anwendungen
Anwendungsbibliothek
EVAL-SCS002V1: Standalone USB Type-C Port Controller for Power Sinking Devices
The EVAL-SCS002V1 shows minimum USB-C sink implementation. It can be uses as a small footprint reference design for fast migration of any USB mini-B, micro-B or STD-B application to USB-C....
TS3DV642EVM: HDMI 1:2 Multiplexer and Demultiplexer Switch
The TS3DV642 is a 12 channel 1:2 or 2:1 bidirectional multiplexer/demultiplexer. The TS3DV642 operates from a 2.6 V to 4.5 V supply, making it suitable for battery-powered applications. It...
LC234X: USB to UART Bridge
The LC234X module is a low cost USB to UART bridge using the FTDI FT234XD to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinout follows the indu...
TUSB546EVM: USB Type-C Alternate Mode Redriver Switch
The TUSB546 USB Type-C™ Alternate Mode Redriver Switch Evaluation Module (TUSB546EVM) provides a USB Type-C Alternate Mode redriver switch that enables 5Gbps USB data and 8.1Gbps DisplayPor...
EVB_RT1710SGQW: Type-C Cable Identifier for Passive and Active Cables
The RT1710S is a Type-C cable ID for active and passive cables. All USB Full-Featured Type-C cables shall be electronically marked. Electronically marked cables shall support USB Power Deli...
MAXREFDES145#: 8-Channel IO-Link Master
The MAXREFDES145# 8-Channel IO-Link® Master Quick Start Guide describes the steps required to quickly get the MAXREFDES145# reference design up and running by controlling it with TEConcept'...
DC1789A: Isolated USB 2.0 Transceiver
Demonstration circuit 1789A is an isolated USB transceiver with isolated power featuring the LTM®2884. The demo circuit features an EMI optimized circuit configuration and printed circuit b...
EVAL-CN0179-PMDZ: 4-20 mA Low Power, 14-Bit, Process Control Current Loop Transmitter
The circuit on EVAL-CN0179-PMDZ is a 4 mA-to-20 mA current loop transmitter for communication between a process control system and its actuator. The circuit output is 0 mA to 20 mA of curre...
EVAL-CN0355-PMDZ: Temperature Compensated Bridge Signal Conditioner and Driver
The circuit on EVAL-CN0355-PMDZ is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation channel. This circuit is ideal for a variety of...
EVAL-CN0336-PMDZ: 300 kSPS PMOD Data Acquisition System
The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ide...
MAXREFDES46#: 4-Chan Analog Input/Output PLC
The MAXREFDES46# is a compact, analog, remote terminal unit (RTU) programmable logic controller (PLC). This design features four accurate, isolated analog inputs and four accurate, isolated...
MAXREFDES67#: uPLC, 24-Bit Single Ch Analog Input
The MAXREFDES67# reference design is a complete universal analog input for industrial applications. This unique 24-bit front-end accepts bipolar voltage and current, resistance temperature...