SMD Marking

T7

Possible components matching this marking.A marking is not a guaranteed identification by itself.

11possible components
VERY HIGHambiguity level
Filters11 candidates

Narrow the list using the package, manufacturer or component family printed on the board.

11 possible components

Results are ordered by the available marking evidence.

1–11 of 11
1 1SV 2862 evidence sources Toshiba dil1 DIODE HIGH2 sources SMD, CATV Converter, 1.Osc. | Si-DiManufacturer hint: Toshiba 2 1SV 2582 evidence sources Toshiba dil1 DIODE HIGH2 sources SMD, CATV Converter, 1.Osc. | Si-DiManufacturer hint: Toshiba 3 1SV 2302 evidence sources Toshiba dil1 DIODE HIGH2 sources SMD, CATV Converter, 1.Osc. | Si-DiManufacturer hint: Toshiba 4 1SV 2242 evidence sources Toshiba smd1 DIODE HIGH2 sources SMD, CATV Converter, 1.Osc. | Si-DiManufacturer hint: Toshiba 5 ZUMT 817 -252 evidence sources Zetex smd2 TRANSISTOR HIGH2 sources SMD, Small Signal Amplifier, 45V 0.5A 0.33W | Si-NManufacturer hint: Zetex 6 FS 3M2 evidence sources Fagor Electronica smd1 DIODE HIGH2 sources SMD, Passivated Rectifier, 1000V, 3A | Si-DiManufacturer hint: Fagor Electronica 7 BSR 152 evidence sources Philips Semiconductors / Thomson Semiconducteurs / Valvo / National Semiconductor / Fairchild Semiconductor smd2 TRANSISTOR HIGH2 sources SMD, High Current Switch, 40V 0.6A 0.25W | Si-PManufacturer hint: Philips Semiconductors / Thomson Semiconducteurs / Valvo / National Semiconductor / Fairchild Semiconductor 8 SST 41172 evidence sources Siliconix smd2 FET HIGH2 sources SMD | Si-NManufacturer hint: Siliconix 9 HVD 144A2 evidence sources Renesas Electronics smd1 DIODE HIGH2 sources SMD, Silicon Epitaxial Planar Pin Diode, 30V | PIN-DiManufacturer hint: Renesas Electronics 10 GDZ 9,1B2 evidence sources Vishay dil1 DIODE HIGH2 sources SMD, Zener Diode | Z-DiManufacturer hint: Vishay 11 BZX384-C3V62 evidence sources Philips Semiconductors dil1 DIODE HIGH2 sources SMD, Voltage regulator diode, 3,6V, Tolerance ±5% | Z-DiManufacturer hint: Philips Semiconductors

Safe identification

How to verify this result

1. Match the physical package

Compare the candidate package with the outline, pin count and polarity mark on the actual board.

2. Confirm the electrical fit

Check the official datasheet for pinout, voltage, current and thermal ratings—not only the marking.

3. Treat uncertainty as a stop signal

Do not treat a short marking, a low-confidence candidate or a family match as a drop-in replacement.