SMD Marking

P6

Possible components matching this marking.A marking is not a guaranteed identification by itself.

11possible components
VERY HIGHambiguity level
Filters11 candidates

Narrow the list using the package, manufacturer or component family printed on the board.

11 possible components

Results are ordered by the available marking evidence.

1–11 of 11
1 SM-1 XP62 evidence sources Unknown manufacturer (ORG) axial1 DIODE HIGH2 sources Gleichrichter, S | Si-DiManufacturer hint: Unknown manufacturer (ORG) 2 RT 1 P430C2 evidence sources Mitsubishi smd2 TRANSISTOR HIGH2 sources SMD, Rb=4,7 ± 1,4kOhm | Si-PManufacturer hint: Mitsubishi 3 KRA 769 U2 evidence sources KEC Semiconductor smd1 TRANSISTOR HIGH2 sources SMD, Dual, S, Rb=4,7kOhm, Rbe=10kOhm | Si-P+RManufacturer hint: KEC Semiconductor 4 KRA 569 U2 evidence sources KEC Semiconductor smd2 TRANSISTOR HIGH2 sources SMD, Dual, S, Rb=4,7kOhm, Rbe=10kOhm | Si-P+RManufacturer hint: KEC Semiconductor 5 KRA 319 E2 evidence sources KEC Semiconductor smd2 TRANSISTOR HIGH2 sources SMD, S, Rb=4,7kOhm, Rbe=10kOhm | Si-P+RManufacturer hint: KEC Semiconductor 6 HVM 131SR2 evidence sources Hitachi smd2 DIODE HIGH2 sources SMD,Dual, PIN-Diode Antennen-Schalter | Si-DiManufacturer hint: Hitachi 7 BB 1462 evidence sources Philips Semiconductors dil1 DIODE HIGH2 sources SMD, TV-UHF-Tuning(extend.) | Si-DiManufacturer hint: Philips Semiconductors 8 BFG 480W2 evidence sources Philips Semiconductors smd1 TRANSISTOR HIGH2 sources SMD, wideband transistor, 4.5V 80mA, 360mW | Si-NManufacturer hint: Philips Semiconductors 9 RT 1 P430M2 evidence sources Mitsubishi smd2 TRANSISTOR HIGH2 sources S, Rb=1±0,3kOhm Rbe=22kOhm Rbe/Rb=20..24 | Si-NManufacturer hint: Mitsubishi 10 BFP 962 evidence sources Philips Semiconductors / Thomson Semiconducteurs / Valvo hf1 TRANSISTOR HIGH2 sources UHF-A | Si-NManufacturer hint: Philips Semiconductors / Thomson Semiconducteurs / Valvo 11 2SD1161-P62 evidence sources Sanyo Semiconductor smd2 TRANSISTOR HIGH2 sources SMD, Buzzer-Tr int. Emitter-R (100..160Ohm) | Si-NManufacturer hint: Sanyo Semiconductor

Safe identification

How to verify this result

1. Match the physical package

Compare the candidate package with the outline, pin count and polarity mark on the actual board.

2. Confirm the electrical fit

Check the official datasheet for pinout, voltage, current and thermal ratings—not only the marking.

3. Treat uncertainty as a stop signal

Do not treat a short marking, a low-confidence candidate or a family match as a drop-in replacement.